Crafty types all seem to have a common problem: never enough storage. Well, I’m here to help! With just a few supplies and an afternoon, you can make space for everything, without taking up any floor space.
Let’s get started! First, measure your door to see how wide & long you’d like the organizer to be. I needed mine to be 22 inches wide by about 40 inches long. Add 2 inches to the width and 4 inches to the length. You will need 2 pieces cut the size of the base.
For my base, I chose to use Lenda curtains from Ikea. They’re cheap and sturdy, plus I love the shade of the color. They also have a small pinstripe detail (you can see it beside the scissors) – If you center those pinstripes when cutting, it will help to line up the pockets later.
Sew together the two pieces around 3 sides, like a big pillow case, with a 1 inch seam allowance.
Turn out the fabric, then iron it flat. Next, iron a seam into it, then stitch up that seam. Once your base is sewn shut, turn it down 2 inches and sew another seam, creating a rod pocket.
To find your pocket measurements, divide the length of your base by 4 (or 5 or 6 or however many rows you’d like), then add a few inches for space between them. I wanted 4 rows of pockets, one every 10 inches, and they go across the width of the base.
To create my pocket strips, I cut my fabric 13 inches wide by 30 inches long, I folded the strips long way (like a hot dog bun), and sewed a seam with a 1/2 inch seam allowance down one short end and across the long end. Next, I ironed it flat, then sewed up the open end, just like the base. This gave me a 6 inch wide, 28(ish) inch long strip. The extra inches on the end will help create more room for the pockets.
To attach the pockets, I started by finding the middle of the strip, and pinning it to the pinstripe detail I mentioned (but you could also just find the middle of your fabric by measuring.) Then I pinned it at the 1/4 mark, and at the ends. I pinned all four of the pockets on, then stitched from top to bottom across all four seams, creating a series of open bottom pockets.
When I stitched across the bottom to complete the pocket, I put a small fold on each side of the side seams. I did have to adjust my tension – so just be aware that you may need to, also. Once all your rows are stitched down, give yourself a hand
I wanted to embellish mine to make it all pretty, so I printed out some bird images from The Graphics Fairy onto iron on transfer, and trimmed them all out.
I placed them kinda scattered over the pockets, not in any particular direction, then ironed them down according to the directions on the package.
Last, but not least, thread the dowel rod through the pocket that you created and use the door hooks to hang it over the door. And you’re done!
There you have it: A customized, stylish hanging organizer. I love the birds, but it would also look gorgeous if you found vintage images of the supplies and put them on the intended pockets, too! Besides craft supplies, it would look beautiful in a bathroom for toiletries, or even in a pantry for small items.
For more organizing solutions, visit my blog today to see how I keep everyday clutter at bay!
*This post contains affiliate links